The Sparkoz TN70 is an autonomous commercial cleaning robot designed for medium to large indoor environments where floor cleaning is repetitive, labour-intensive and needs to be completed consistently.
Available in both Disc and Cylindrical configurations, the TN70 combines autonomous navigation, commercial scrubbing performance, large water capacity and optional docking or workstation automation.
The TN70 is designed for sites that need more cleaning capacity than compact robots can provide.
With a larger tank system, wider cleaning path and autonomous route execution, it is suited to larger hard-floor areas where cleaning needs to be consistent, repeatable and easier to supervise.
The TN70 can operate manually or autonomously, depending on the site setup, cleaning workflow and selected charging or workstation configuration.
The TN70 is best suited to larger indoor sites where coverage, tank capacity and commercial scrubbing performance matter more than compact manoeuvrability.
For larger commercial floor areas, TN70 is often a stronger starting point than a compact robot. For tighter or more constrained spaces, Automaate may recommend a smaller robot configuration instead.
The TN70 is available in two cleaning configurations. Automaate will recommend the right version based on floor type, debris load, cleaning frequency and site conditions. The right choice affects debris pickup, pre-sweeping requirements, brush contact and performance on textured or smoother hard floors.
The Disc version is suited to broad hard-floor scrubbing where the primary requirement is consistent cleaning coverage across larger smooth floor areas.
Choose Disc when: the main task is regular scrubbing of smoother hard floors across larger areas.
The Cylindrical version is suited to sites where loose debris, textured floors or reduced pre-sweeping are stronger priorities.
Choose Cylindrical when: debris pickup, textured floors or reduced pre-sweeping are important to the cleaning workflow.
The TN70 can be configured for different levels of autonomy depending on the site, infrastructure and operating model.
The TN70 can be charged manually where a simple setup is preferred or where docking infrastructure is not required.
Best for: sites that prefer manual charging control or have lower-frequency usage requirements.
The automatic docking station allows the TN70 to return for charging. Water refill and wastewater drainage remain manual unless the workstation is selected.
Best for: sites that want automatic charging but do not need automatic water management.
The workstation supports automatic charging, clean water refill, wastewater drainage and scheduled task support for higher-autonomy cleaning cycles.
Best for: larger sites wanting reduced manual water handling and more autonomous cleaning cycles.The TN70 combines autonomous navigation, mapped cleaning routes, obstacle detection and a commercial cleaning chassis for larger indoor environments.
It supports autonomous route execution, manual operation and connected platform visibility, helping cleaning teams manage repetitive floor-cleaning work more consistently.
The TN70 sensor system may include LiDAR, panoramic monocular camera, depth camera, ultrasonic sensors, IMU and electronic anti-collision strip, depending on configuration.
Key technical details to help assess whether the TN70 suits your site.
| Category | TN70 specification |
|---|---|
| Cleaning configurations | Disc / SpinDisc or Cylindrical |
| Dimensions | 116cm L x 58cm W x 121cm H |
| Clean water tank | 70 L |
| Recovery tank | 50 L |
| Cleaning width | Approx. 510 mm |
| Squeegee width | Approx. 790 mm |
| Maximum cleaning efficiency | Up to 2,040 m²/h |
| Speed | Up to 4km/h |
| Gradeability | 6% |
| Battery | 24V / 120Ah lead-acid or lithium configuration, depending on version |
| Battery life | Approx. 3-4 hours, depending on battery and cleaning mode |
| Navigation | Vision + laser |
| Manual operation | Standard |
| Charging options | Manual charger, automatic docking station or workstation |
| Brush system | Disc brush |
| Brush size | 20-inch disc brush |
| Ground pressure | Approx. 27 kg |
| Best suited to | Smooth hard floors, broad scrubbing and dust-mop workflows |
| Brush system | Cylindrical brush |
| Brush speed | Up to 600RPM |
| Debris tray | 2 L |
| Best suited to | Textured floors, loose debris pickup and reduced pre-sweeping |
Automaate supports TN70 deployments from site assessment through to long-term operation. We do not just supply the robot. We help design the right cleaning workflow around it.
Review floor type, site size, access, traffic patterns, cleaning frequency, operating hours, water access, drainage access and charging requirements.
Define cleaning zones, routes, schedules, charging location, workstation requirements, water handling, operator responsibilities and support process.
Map the site, configure routes, set schedules, confirm charging or workstation setup and train nominated operators.
Provide guidance on daily operation, consumables, troubleshooting, parts, maintenance, software updates, reporting and performance review.
Review route performance, cleaning coverage, schedule effectiveness and support requirements to improve long-term value.
The right TN70 setup depends on your floor type, debris load, site size, cleaning frequency, water access, charging location, drainage access and operating hours. Automaate can assess your site and recommend whether the Disc or Cylindrical version, manual charger, docking station or workstation is the right fit.